Grip underfoot and deeper color at the water
Pool Deck Paver Sealing in Bellair-Meadowbrook Terrace, FL
Ask a local contractor about sealing your Bellair-Meadowbrook Terrace pool deck pavers, and call (904) 914-8201 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals pool deck pavers in Bellair-Meadowbrook Terrace, and how soon do I hear back?
Pool deck paver sealing in Bellair-Meadowbrook Terrace, FL is done by a local contractor, and requests get an answer within 1 business day, often within a few hours. The estimate costs nothing, and you decide afterward. To start, call (904) 914-8201.
Think about the walk from the back door to the water. Bare feet, sunscreen, splash and pool chemicals meet that surface every day, and the pavers show it as dull color, dark corners and joints that have lost their sand. Sealing a deck brings the color back and gives rinsing less work to do. When you are ready to talk about your deck, request your free estimate.
Does pool deck sealing reach my street in Clay County?
What does sealing do for a deck that gets wet every day?
Pavers around a pool soak up water, and moisture is what feeds mildew. Unilock lists added resistance to moisture and mildew as a benefit on pool decks and sidewalks, along with resistance to the fading strong sun causes. A coat also makes a sweep or a hose-down work better. To see how your deck looks today, request your free estimate.
Premier Coatings, a Florida sealing company, adds that sealing slows the breakdown from UV, chlorine and rain, and that it limits how far sunscreen, oils and pool chemicals sink in. That matters on a deck, because oily film left by bare feet is what darkens the lounge area first. Dial (904) 914-8201 if you want to hear what that coat would mean for your own deck.
Will a sealed pool deck feel slippery on bare feet?
It depends on the finish. Unilock says high gloss sealers can be slippery when wet and that a matte one is the safer pick. The Concrete Network says that with the right product a pool deck will not be slippery when wet, either through a sealer made to resist slipping or one mixed with a traction additive. Ask your contractor which product is planned, and request your free estimate.
A test patch settles the question before the whole deck is coated. Unilock and Prosoco both advise trying a sealer on a small area first, and on a pool deck the test should be walked on while wet. Call (904) 914-8201 to ask for that test.
Which finish fits a pool deck: matte, satin or wet look?
Three finishes are common, and Premier Coatings lists matte, satin and gloss. Most owners care about two things around a pool, grip and color. Pick by how the deck is used, then check a sample patch in dry and wet light. To compare samples, request your free estimate.
Matte or natural
Closest to the bare paver look, and the choice Unilock points to for traction. It suits a deck where children run barefoot.
Satin
A soft sheen that brings out color without a mirror shine. Ask to see a sample patch dry and then wet.
Wet look
Deepest color, and the most likely to feel slick when splashed. Unilock cautions that high gloss can be slippery when wet.
How do chlorine and pool water wear on the coat?
Chlorine from the pool sits on the Concrete Network's list of threats to a deck, next to sun exposure. A washing company that serves this part of Clay County says chlorine, full sun and summer storms can cut the time between coats to about two years. Splash zones near the steps and the skimmer wear out first. To ask where your deck will wear first, call (904) 914-8201.
How does a screen enclosure or lanai change the work?
The enclosure turns a sealing job into a masking job. Screen panels, door tracks, light fixtures and potted plants are covered, and sprinklers are switched off, because Unilock says water can leave white marks or get trapped under the sealer. Shade matters too, since pavers under a roof dry in about 24 hours instead of a few. To explain your layout, request your free estimate.
If the deck runs out past the screen, the contractor usually works in sections so the coat stays even where sun and shade meet. Mention any step-down, outdoor shower or built-in grill when you call (904) 914-8201.
Why are there orange streaks on my pool deck near the sprinklers?
Look at where the sprinkler heads aim. UF/IFAS says most Florida well water is high in iron, that high-iron irrigation water leaves rust deposits on whatever it touches, and that orange streaks on building exteriors are a common sign. A Clay County area washing company adds that pressing harder makes rust marks worse. A rust treatment goes on before the sealer, and the heads may need re-aiming. To have the marks looked at, call (904) 914-8201.
UF/IFAS suggests testing the water, and your county Extension office can advise on that. Fixing the source keeps new stains from showing up on a fresh coat, so ask about it when you request your free estimate.
What about pavers around the pool that have sunk or lifted?
Those need to be reset before sealing. Premier Coatings lists resetting loose, sunken or damaged pavers as its own step, and Unilock says plainly that sealing is not a cure for poor drainage or base problems. Bellair-Meadowbrook Terrace sits at about 62 feet above sea level, below the Clay County average of 95 feet, so ask where water goes after a storm when you request your free estimate.
A paver that rocks underfoot is a trip hazard by the water, which is one more reason to raise it with the contractor on the first call. Dial (904) 914-8201 and describe where the low spots are.
How often should a pool deck in Bellair-Meadowbrook Terrace be resealed?
Published figures differ a little. Premier Coatings says most Florida pool decks benefit from a new coat every two to three years, the Concrete Network gives two to five, and Unilock says many owners reapply every three to five years for pavers in general. The sign the Concrete Network gives is easy to check: when water soaks in instead of beading, the coat is spent. To have a deck checked, call (904) 914-8201.
When is a good time to seal a pool deck in Clay County?
Pick a dry stretch. Unilock asks for 24 to 48 hours of clear skies beforehand, temperatures between 50 and 90 degrees with 75 the sweet spot, and sprinklers off until the sealer has cured. A washing company serving this area calls fall the drier season, and it says summer storms wash joint sand out. For a date that fits the forecast, request your free estimate.
New pavers have to wait. Unilock says 60 to 90 days after installation, so efflorescence, the white haze of natural salts, has time to clear. If the pool deck is newer than that, give the install date when you call (904) 914-8201.
What does it cost to seal a pool deck in Bellair-Meadowbrook Terrace?
No page for this town gave a pool deck price, so the table below is built from the range one First Coast washing company publishes for the whole clean, re-sand and seal job: $1.75 to $3.25 per square foot. Size sets the price first, then condition. To turn the range into a figure for your deck, request your free estimate.
The sealer alone is a smaller piece. Unilock puts it at $80 to $150 per gallon, with solvent-based covering 80 to 120 square feet and water-based 100 to 150, so a 700 square foot deck needs roughly five to nine gallons. Ask for the product name and coverage in writing. To ask about your pool, call (904) 914-8201.
| Pool deck size | What it usually covers | Clean, re-sand and seal |
|---|---|---|
| 400 sq ft | Narrow deck on one side of a small pool | $700 to $1,300 |
| 700 sq ft | Deck on two sides of a screened pool | $1,225 to $2,275 |
| 1,000 sq ft | Deck wrapping most of the pool and a lanai | $1,750 to $3,250 |
| 1,400 sq ft | Large deck with an outdoor kitchen pad | $2,450 to $4,550 |
Built from the $1.75 to $3.25 per square foot a First Coast washing company publishes for cleaning, re-sanding and sealing pavers. No page for this town gave a pool deck price of its own. Resetting sunken pavers and stripping failed sealer are usually extra.
| Sealer type | Coverage per gallon | Sealer cost for a 700 sq ft deck |
|---|---|---|
| Solvent-based | 80 to 120 sq ft | about $470 to $1,310 |
| Water-based | 100 to 150 sq ft | about $370 to $1,050 |
Coverage and the $80 to $150 per gallon price come from Unilock. The sealer is one line of a quote; the wash, sand and labor make up the rest.
What is the process for sealing a pool deck?
A pool deck job runs in six steps, from a walk around the deck to the cure. Each step has a reason, and the order matters. To go through them for your deck, call (904) 914-8201.
1. Walk the deck and the edge
The contractor measures the deck, notes how water drains toward the coping and the drain, and marks loose or sunken pavers. Shaded corners and splash zones get a closer look.
2. Mask and switch off water
Screen panels, door tracks, light fixtures and planters are covered. The sprinklers are turned off, a step Unilock asks for because water can cause white marks under the coat.
3. Clean the surface evenly
A rotary surface cleaner goes across the deck so no wand stripes show, the method a Clay County area washing company describes. Sunscreen and oil film come off along with mildew.
4. Reset low pavers and refill joints
Loose or sunken pavers are lifted and leveled, then the joints are filled with fresh sand, a step Premier Coatings lists before sealing.
5. Let the deck dry
A few hours in warm sun or about 24 hours in cool shade, says Unilock. Sealing a damp deck is how a milky film starts.
6. Apply the coat and cure
The sealer goes on in the finish you chose, then the deck cures. Unilock allows up to 48 hours of dry weather, so swimming and furniture wait.
What should I know about homes in Bellair-Meadowbrook Terrace before I book?
Wikipedia counts 14,482 residents in 2020, up from 13,343 in 2010 but below 16,539 in 2000, and a median age of 35.8. It lists 6,168 housing units, 7.0 percent of them vacant, down from 6,805 units in 2010. Neighborhoods include Bellair, Cedar Bend, Grove Park, Holly Cove, Loch Rane, Meadowbrook, Wellington Place and Wells Ridge, with Blanding Boulevard as the main road. To talk about your own deck, request your free estimate.
What do sealed pool decks look like in Clay County?
Why have a local contractor seal my pool deck?
A contractor who works in Clay County already knows how summer storms, shade and sprinkler water treat a deck. The price comes on paper, and you can say no. To get started, request your free estimate.
Ready to hear what your pool deck needs?
Phone or send the short form, and a local contractor replies within 1 business day, usually much sooner than that.
Free, no obligation
Frequently asked questions about pool deck sealing
How much to seal a pool deck?
A First Coast washing company lists $1.75 to $3.25 per square foot to clean, re-sand and seal pavers, and it counts pool decks among those jobs. A 700 square foot deck lands near $1,225 to $2,275 at that range. A published sealer price of $80 to $150 per gallon covers only the product, so the rest of the quote pays for washing, sand and labor.
Is it good to seal pavers in Florida?
For a pool deck it often is. Unilock says sealer resists fading from strong sun and adds resistance to moisture and mildew around pools. It also notes that pavers do not need sealer to perform, so the choice comes down to whether you want the color kept and the surface easier to rinse.
Is it better to spray or roll paver sealer?
Unilock describes a pump-up sprayer or a foam roller laying the sealer down, with a dry roller lifting extra so streaks do not form. Around a pool the larger question is the finish, since a gloss coat can feel slick on wet feet. Ask which tool and which finish the contractor plans to use.
Why is paver sealing so expensive?
Preparation does most of it. A pool deck has to be washed, checked for loose pavers, refilled with joint sand and left to dry before any coat goes on, and one Clay County area washing company says empty joints turn the job into a two day restoration. The sealer is the smaller line.
How much does it cost to have pavers cleaned and sealed?
The only range found for this region is $1.75 to $3.25 per square foot for the whole job. A small 400 square foot deck comes to about $700 to $1,300, and a 1,000 square foot deck to about $1,750 to $3,250. Stripping failed sealer or resetting sunken pavers is priced on top.
Will a sealed pool deck be slippery?
A high gloss coat can be. Unilock calls matte finishes the safer choice, and the Concrete Network says a sealer made to be slip resistant, or one with a traction additive, will not be slippery when wet. Ask for a small test area before the whole deck is coated.
Does pool chlorine break down paver sealer?
It speeds up wear. The Concrete Network lists chlorine from the pool as one of the threats to a deck, and a First Coast washing company says chlorine can shorten the gap between coats to about two years. Rinsing off heavy splash helps the coat last, so ask the contractor how often to expect a recoat.
How long does a sealed pool deck last in Bellair-Meadowbrook Terrace?
Published ranges run from two to three years for Florida pool decks to three to five years for sealed pavers in general. Sun, chlorine and summer storms push toward the short end. A deck that stays shaded by a screen enclosure may reach the long end.
Can a deck around a screened pool in Bellair-Meadowbrook Terrace be sealed?
Yes. The screen, door tracks and plants get covered first, and the sprinklers are switched off, since Unilock says water on the surface can leave white marks or get trapped under the coat. Ask how overspray near the screen will be handled.
Why did orange stains show up on my pool deck?
Sprinkler water carrying iron is the usual cause. UF/IFAS says most Florida well water is high in iron and that orange streaks on building exteriors often come from irrigating with it. More pressure makes these marks worse, so they get a rust treatment before sealing.
Can pavers around my pool be sealed if some have sunk?
They can, after the low spots are reset. Unilock says sealing is not a cure for poor drainage or base problems, so a sunken paver that holds water has to be lifted and leveled first. Ask whether resetting is in the price or billed separately.
Other paver services in Bellair-Meadowbrook Terrace
Want a free look at your pool deck pavers?
Share your street and the size of the deck, and expect a reply inside 1 business day, usually much sooner.
Free, no obligation